Page 116 - SACE Tmax XT - Catalogue

4/20 SACE TMAX XT LOW VOLTAGE MOLDED CASE CIRCUIT-BREAKERS

—

Accessories for Ekip Touch trip units

Signaling
Ekip 1K Signalling
The Ekip 1K Signalling module, available for the XT5, supplies one input contact and one output contact
for control and remote signaling. It can be programmed from the trip unit display or through the Ekip
Connect software and app. Furthermore, when using Ekip Connect, combinations of events can be freely
configured. The Ekip 1K Signalling device is installed inside the circuit-breaker in the housing provided on
—
Ekip Signalling 1K the left down side of the circuit-breaker and it can be used when an Ekip Touch trip unit is present.

Ekip 2K Signalling modules
The Ekip 2K Signalling modules supply two input and two output contacts for control and remote
signaling of alarms and circuit-breaker trips. They can be programmed from the trip unit display or via
the Ekip Connect software and app. Furthermore, when using Ekip Connect, combinations of events can
be freely configured. Three versions of the Ekip 2K Signalling modules are available: Ekip 2K-1, Ekip 2K-
2, and RELT Ekip 2K-3. In this way, a maximum of three modules for XT2, XT4 and XT5 can be installed at
the same time into an Ekip Cartridge, while a maximum of two modules can be installed at the same
time into the terminal box for XT7 and XT7 M. Moreover, RELT Ekip Signalling 2K-3 module enables the
— wizard for easy configuration of the 2I protection.
Ekip 2K Signalling
modules
Ekip 3T Signalling modules
The Ekip 3T Signalling modules provide three analog inputs for PT100/PT1000 thermo-resistances and
one analog input 4-20mA for external sensors. Through the Ekip Connect commissioning tool, it is
possible to set different control thresholds and associate them to digital signals. The Ekip 3T Signalling
modules are suitable for all the versions of Ekip Touch and Hi-Touch trip units. However, PT100 sensors
are compatible with the Ekip black platform only. Up to two modules can be installed simultaneously on
SACE Tmax XT: one Ekip Signalling 3T-1 and one Ekip Signalling 3T-2. ABB external probes PT1000 are
available for busbar applications.

—
Ekip 3T Signalling
modules