Page 117 - SACE Tmax XT - Catalogue

COMMUNICATION AND CONNECTIVITY 4/21

Ekip 10K Signalling unit
The Ekip 10K Signalling unit is an external device designed for DIN-rail installation. The unit provides
ten contacts for electrical signaling of timing and tripping of protection devices. If connected via the
Ekip Connect software, the contacts can be freely configured in association with any event and alarm
or combination of both. Several Ekip 10K Signalling units (max 4) can be used at the same time on the
same Ekip trip unit. The Ekip 10K Signalling module can be powered either by direct or alternating cur- 04
rent and can be connected to all the trip units via internal bus or Ekip Link modules.
—
Ekip 10K Signalling unit
Ekip Signalling Modbus TCP
It is an external signalling unit designed for DIN rail installations. The function of the signalling module
is to share - via an Ethernet network with Modbus TCP communication protocol - information about the
state of circuit-breakers that might not have the ability to provide such information via Ethernet, and
also to allow these circuit-breakers to be operated via remote control.
Output contacts characteristics Number of contacts
Type Monostable Ekip 1K Ekip 2K
Maximum switching voltage 150V DC / 250V AC
— Maximum switching current
Ekip Signalling 30V DC 2A
Modbus TCP
50V DC 0.8A 1 output + 1 input 2 output + 2 input
150V DC 0.2A
250V AC 4A
Contact/coil insulation 1000 Vrms (1min @50Hz)

Ekip 10K/Ekip Signalling Modbus TCP power supply
Auxiliary supply 24-48V DC, 110-240V AC/DC
Voltage range 21.5-53V DC, 105-265V AC/DC
Rated power 10VA/W
Inrush current 1A for 10ms

Signaling contacts for the XT7 and XT7 M Ekip trip units
With XT7 and XT7 M circuit-breakers, the Ekip trip units can acquire the status of the circuit-breaker
ready to close (RTC) and racked-in, test, or racked-out position through the optional Ekip RTC and Ekip
AUP signaling contacts. These contacts, housed in the accessories area of the circuit-breakers, are
available with the Ekip Dip and Ekip Touch.

—
Signaling contacts
for Ekip trip units