Page 29 - MCCB-XT2-XT4

ABB | SACE Tmax XT

(1)
Advanced menus The Advanced menu can be used to configure the following protections :
Name Parameters SW package Page
MCR List in dedicated chapter 41
2I List in dedicated chapter Standard Protections 42
IU List in dedicated chapter 43
UV (2) List in dedicated chapter 45
OV (2) List in dedicated chapter 46
UV2 (2) List in dedicated chapter Voltage protections 46
OV2 (2) List in dedicated chapter 47
VU (2) List in dedicated chapter 47
S(V) (2) List in dedicated chapter 48
S2(V) (2) List in dedicated chapter Voltage Advanced protections 49
RV (2) List in dedicated chapter 51
UF (2) List in dedicated chapter 52
OF (2) List in dedicated chapter Frequency protections 53
UF2 (2) List in dedicated chapter 53
OF2 (2) List in dedicated chapter 54
RP (2) List in dedicated chapter 55
D (2) List in dedicated chapter 56
RQ (2) List in dedicated chapter Power protections 59
OQ (2) List in dedicated chapter 58
UP (2) List in dedicated chapter 59
OP (2) List in dedicated chapter 58
ROCOF (2) List in dedicated chapter ROCOF protections 61
R STALL (2) List in dedicated chapter 64
R JAM (2) List in dedicated chapter 64
UC (2) List in dedicated chapter Motor protections 65
U (2) List in dedicated chapter 65
PTC (2) List in dedicated chapter 66
Threshold 1 I1, Threshold 2 I1,
Signallings Threshold Iw1, Threshold Iw2, 75
Phase Sequence , Cos φ (3) Standard Protections
(2)
External Trip, Trip Reset, Switch
Functions 75
On SET B (4)
Synchrocheck List in dedicated chapter (5) 72

(1) if the Adaptive Protections package is available and Dual set has been activated, an
intermediate menu where the set can be selected (Set A / Set B) will be available before the list of
protections (page 62); The only menu always present via Advanced is Functions
(2) available if provided for by Trip unit model or if the relative SW package has been activated, where
possible (page 6)
(3) Cos φ available if provided for by Trip unit model or if the Power Protections package has been
activated
(4) SET B available when Adaptive Protections package is present
(5) available when Ekip Synchrocheck is present

27 | © 2022 ABB | 1SDH002031A1002 - ECN000212994 Ekip Touch - Interface and menus | 3 - Menu