Page 33 - MCCB-XT2-XT4

ABB | SACE Tmax XT

4 - Changing parameters and commands

Changing parameters Comply with the following procedure to change one or more parameters:
IMPORTANT: parameters can be changed with Trip unit in the Local mode and in the
absence of timing alarms
• 1. Press Enter to select the parameter you want to change. Enter the password if required.
• 2. Use the Right/Up and Left/Down buttons to select the new value from the list of available values
(1) or use the min/max bar (2)

Figure 15
• 3. Press Enter to select the required value. The display will automatically show the higher level submenu
and the parameter

Figure 16
Now proceed by confirming the programming (Step 4) or access other parameters if further
changes are required (Step 1).
• 4. Press ESC to go back to the higher level menu until the Programming page appears.
Various commands are enabled in the Programming page:
Confirm to validate the new parameters and conclude the programming procedure
Abort to interrupt the save data process
Modify to go back to the menus and change the parameter

Figure 17
Move to the required item with the Right/Up and Left/Down buttons and confirm by pressing
Enter.

31 | © 2022 ABB | 1SDH002031A1002 - ECN000212994 Ekip Touch - Interface and menus | 4 - Changing parameters and commands