Page 28 - MCCB-XT2-XT4

ABB | SACE Tmax XT

3 - Menu

Introduction Press Enter or ESC from the main page to access the different menus of the Trip unit.

Figure 13

Use the Enter, ESC, Right/Up and Left/Down buttons to browse the menus and respective submenus,
which display:
• settable parameters
• information and measurements
• commands that can be executed

Elements of each item Each item in the submenus consists of:
• submenu name
• set value (white text on black background)
• other values that can be set (black text on white background)

Figure 14

Protections Menu The Protections menu can be used to configure the following protections :
(1)
Name Parameters SW package Page
L List and description in dedicated chapter 36
S List and description in dedicated chapter 37
S2 List and description in dedicated chapter Standard 38
Protections
I List and description in dedicated chapter 39
G (2) List and description in dedicated chapter 40

(1) if the Adaptive Protections package is available and Dual set has been activated, an
intermediate menu where the set can be selected (Set A / Set B) will be available before the list of
protections page 62
(2) available for LSIG versions

26 | © 2022 ABB | 1SDH002031A1002 - ECN000212994 Ekip Touch - Interface and menus | 3 - Menu