Page 30 - 35_DS702_E_2014_Lightning_Protection_Guide

Supplement 2 of the German DIN EN 62305-3 DIN V VDE V 0185-600:2008 (German standard)
standard:2012 Testing of the suitability of coated metallic roofs as a natural
Additional information for special structures components of the lightning protection system

Supplement 3 of the German DIN EN 62305-3 Special standards for earth–termination systems
standard:2012
Additional information for the testing and maintenance of DIN 18014:2007 (German standard)
lightning protection systems Foundation earth electrode – General planning criteria
Supplement 4 of the German DIN EN 62305-3 DIN VDE 0151:1986 (German standard)
standard:2008 Material and minimum dimensions of earth electrodes with
Use of metallic roofs in lightning protection systems respect to corrosion

IEC 61936-1:2010 (EN 61936-1:2010)
Supplement 5 of the German DIN EN 62305-3 Power installations exceeding 1 kV a.c.
standard:2014
Lightning and overvoltage protection for photovoltaic power EN 50522:2010
supply systems Earthing of power installations exceeding 1 kV a.c.

IEC 62305-4:2010 (EN 62305-4:2011) DIN VDE 0141:2000 (German standard)
Electrical and electronic systems within structures Earthing system for special power installations with nominal
voltages above 1 kV
IEC 62561-1:2012 (EN 62561-1:2012)
Requirements for connection components EN 50341-1:2012
This standard describes the requirements for metal connection Overhead electrical lines exceeding AC 1 kV
components such as connectors, connecting and bridging com-
ponents, expansion pieces and test joints for lightning protec- EN 50162:2004
tion systems. Protection against corrosion by stray current from direct cur-
rent systems
IEC 62561-2:2012 (EN 62561-2:2012)
Requirements for conductors and earth electrodes Special standards for internal lightning and surge
This standard specifies e.g. the dimensions and tolerances protection, equipotential bonding
for metal conductors and earth electrodes as well as the test
requirements for the electrical and mechanical values of the IEC 60364-4-41:2005 (HD 60364-4-41:2007)
materials. Low-voltage electrical installations – Part 4-41: Protection for
safety - Protection against electric shock
IEC 62561-3:2012 (EN 62561-3:2012) IEC 60364-4-44:2001 (HD 60364-4-443:2006)
Requirements for isolating spark gaps
Low-voltage electrical installations – Part 4-44: Protection for
safety – Protection against voltage disturbances and electro-
IEC 62561-4:2010 (EN 62561-4:2011) magnetic disturbances – Clause 443: Protection against over-
Requirements for conductor fasteners
voltages of atmospheric origin or due to switching
IEC 62561-5:2011 (EN 62561-5:2011) IEC 60364-4-44:2007 (HD 60364-4-444:2010)
Requirements for earth electrode inspection housings and Low-voltage electrical installations – Part 4-444: Protection for
earth electrode seals safety – Protection against voltage disturbances and electro-
magnetic disturbances
IEC 62561-6:2011 (EN 62561-6:2011)
Requirements for lightning strike counters IEC 60364-5-53:2002 (HD 60364-5-534:2008)
Low-voltage electrical installations – Selection and erection
IEC 62561-7:2011 (EN 62561-7:2012) of electrical equipment – Isolation, switching and control –
Requirements for earthing enhancing compounds Clause 534: Devices for protection against overvoltages

www.dehn-international.com LIGHTNING PROTECTION GUIDE 29