Page 33 - Arc Guard System - TVOC-2

ABB ARC GUARD SYSTEM™ – TVOC-2 INSTALLATION AND MAINTENANCE GUIDE 33

4.3 Settings

This chapter describes the five mandatory steps to
succeed in setting the system. All settings are done in the
Human Machine Interface, HMI. Settings are made only
with the power on.
4.3.1 Start-Up Sequence

Installation of the Arc Monitor requires configuration
of the system and its modules to work. This start-up is
mandatory. The same start-up occurs when operating the
Arc Monitor for the first time and when adding/removing
modules for the Arc Monitor. The Human Machine
Interface (HMI) automatically go through the different
configuration steps.

To do the Start-Up sequence follow the steps below:
1. Set language of the system menu
04
2. Set time and date
3. Confirm connected modules
4. Check DIP Switches
5. Final confirmation
INFORMATION
The system will not require the Start-Up
sequence in the event of a power loss.

Step 1: Setting menu language
This is the first step to make the system work after
installing the Arc Monitor.
Use this procedure to choose the language of the system
menu during startup.
In the Start-Up menu do the following:
1. Mark the language to use and press OK.
2. Confirm by pressing YES.

Available languages
Language currently available in the system is:

• English (us/uk)

Step 2: Setting time
This is the second step to make the system work after
installing the Arc Monitor. Use this procedure to set the
time and date in the system.
In window, 3.4 Set Time do the following:
1. Scroll to correct hour, press OK.
2. Scroll to correct minutes, press OK.
3. Scroll to correct day, press OK.
4. Scroll to correct month, press OK.
5. Scroll to correct year, press OK.