Page 68 - SACE Tmax XT - Catalogue

3/34 SACE TMAX XT LOW VOLTAGE MOLDED CASE CIRCUIT-BREAKERS

—

Ekip Touch/Hi-Touch

Protection functions

The Ekip Touch/Hi-Touch enables all the protection functions to be set
with a few simple steps.

Thanks to the ABB Ability Marketplace™, it is always possible to customize the Ekip Touch/Hi-Touch trip units when ordering
and also when the circuit-breaker is already installed by using the Ekip Connect App.
Each trip unit has a default protection set, as shown in the table below. Adding other functional packages to this set is al-
TM
ways possible, either directly when ordering the circuit-breaker, or via ABB Ability Marketplace at a later time.
The following protection software packages are available to be added to any version of Ekip Touch/Hi-Touch trip units:
• Voltage Protection
• Voltage Protection Advanced
• Frequency Protection
• Power Protection
• ROCOF Protection
• Adaptive Protection

ABB Code ANSI Code Function Ekip Touch LSI Ekip Touch LSIG Ekip Touch Measuring Ekip Touch Measuring Ekip Hi-Touch LSI Ekip Hi-Touch LSIG Ekip M Touch LRIU Ekip G Touch LSIG Ekip G Hi-Touch LSIG
LSI LSIG
Default Protection
L 49 Overload ● ● ● ● ● ● ● ●
S 50 TD / 68 / 51 Selective short circuit ● ● ● ● ● ● ● ● ●
I 50 Instantaneous short- ● ● ● ● ● ● ● ● ●
circuit
G 50N/50N TD/68/51N Earth Fault ● ● ● ● ● ●
N Neutral ● ● ● ● ● ● ● ●
2I 50 2nd instantaneous ● ● ● ● ● ● ● ● ●
short-circuit
MCR Closing on short-circuit ● ● ● ● ● ● ● ● ●
Iinst Instantaneous high ● ● ● ● ● ● ● ● ●
intensity short-circuit
protection
IU 46 Current unbalance ● ● ● ● ● ● ● ● ●
Harmonic Distortion ● ● ● ● ● ● ● ● ●
T Temperature ● ● ● ● ● ● ● ● ●
Hardware trip ● ● ● ● ● ● ● ● ●
Current Thresholds ● ● ● ● ● ● ● ● ●
S2 50 TD/68 2nd Time delayed ● ● ● ● ● ● ● ● ●
overcurrent
Voltage Protection package
Phase Sequence 47 Cyclical direction of the ● ● ● ● ●
phases
UV 27 Undervoltage ● ● ● ● ●
OV 59 Overvoltage ● ● ● ● ●
UV2 27 2nd Undervoltage ● ● ● ●
OV2 59 2nd Overvoltage ● ● ● ●
VU 47 Voltage unbalance ● ● ● ● ●
Voltage Protection Advanced package
S(V) 51V Voltage controlled ● ●
overcurrent
S(V) 2nd 51V 2nd Voltage controlled ●
overcurrent
RV 59N Residual overvoltage ● ●
● Available as standard
Available as software package to be ordered via ABB MarketplaceTM or during the circuit-breaker ordering phase. To add this function, the Measuring package
must be installed first.