Page 1861 - Din prodcuts 2020

14/47

—
ABB i-bus® KNX
Shading Control

Automatic travel detection Copy and exchange Integration in the room temperature
Travel times for the connected drives This function allows parameter set- control
can be easily determined during opera- tings of an output to be copied or ex- The intelligent and networked blind
tion with the automatic travel detec- changed with other freely selectable and roller shutter control plays an im-
tion feature. It saves time during outputs. portant role in the energy efficient us-
setup. Furthermore, compensation This is possible within a device or in age of a building. The level of sunlight
of age and weather-related length conjunction with several devices. Copy in the room and heating up due to the
changes to blinds or roller shutters is and exchange is useful particularly on sun‘s energy can be controlled in con-
assured. It facilitates precise position- projects, where all drives of a facade junction with the room climate control.
ing of the blinds/shutter when using are controlled identically. The software function “overheat con-
sun position-dependent control. It shortens the setup process and re- trol” prevents unintentional overheat-
duces the possible sources of error ing of a room. The blinds are closed in
with parameterization. good time. The shutter control can be
Diagnostics actively involved in the room tempera-
Enhanced diagnostic messages can be ture control – a requirement for imple-
issued with the Blind/Roller Shutter menting high-efficient buildings com-
Actuators. They are particularly useful pliant to EN 15232. 14
during setup or in the event of faults.
It is possible, for example, to detect
and signal if the power supply to a
drive is interrupted.