Page 2813 - Din prodcuts 2020

20/15

—
Automation boards
Components for automation applications

Gemini switchboards are designed to be perfectly compat- After wiring with the ducts and the Fix-O-Rapid device,
ible with ABB components for low voltage control and moni- the special standard adjustable feet and hooks must be
toring. For these applications they can be equipped with fitted onto the base plate, allowing it to be inserted inside
modular devices belonging to the System pro M range, with the box at up to seven different depths and three further
Tmax moulded-case circuit-breakers and control and signal- levels of adjustment: no tools need to be used to carry out
ing devices, creating a truly integrated automation system. these operations. To finish the job, the inner door can be
When deciding the Gemini layout for control and monitor- mounted (reversible and in insulating material), guaran-
ing applications, not only is it possible to select the box and teeing IP30 degree of protection when the switchboard
door in the required size, but you can also select the base door is open. No tools are needed unless the inner door is
plate in one of the three versions in the range. equipped with buttons, warning lights, etc.

The fixing hooks and feet supplied in the standard versions are applied without hav- Application of the inner door guaran-
ing to use tools, making it possible to install the base plate at seven different depths tees IP30 degree of protection when the
inside the switchboard. They can also be adjusted at three further positions. switchboard door is open.

20

Example of the configuration of a switchboard for an automation application: some ABB control and protection devices are
installed on the plate. The inner door is fitted with light-signaling devices.