Page 236 - Sace Emax 2 Manual for design engineers
P. 236

ABB | SACE Emax 2
        - External neutral



                                    This is a current sensor for the neutral pole outside the circuit-breaker.
                                    It is provided only for three-pole circuit breakers. It allows protection of the neutral to be implemented through
                                    the connection to the Ekip trip unit. It is supplied on request.
                                    Further information on the connection of the external neutral is available on the website http://www.abb.com/
                                    abblibrary/DownloadCenter/, in particular in the kit sheets:
                                     •  1SDH001000r0506 for circuit breakers E2.2.
                                     •  1SDH001000r0515 for circuit breakers E4.2 and E6.2.


       6 - Ekip Com Actuator



                                    Ekip Com Actuator is an accessory module which allows SACE Emax 2 circuit-breakers to be opened and
                                    closed remotely.
                                    The module is installed on the front of the circuit-breaker, in the accessories area.
                                    For references about the connection and terminals, please consult document  1SDH000999r0501 and
                                    1SDH001000r0501
                                    The Ekip Com Actuator module is supplied on request and is compatible with all Ekip Touch Trip units when
                                    the Ekip Com or Ekip Link modules are installed.


       7 - Ekip AUP



                                    The communication modules are always supplied with dedicated Ekip AUP auxiliary position contacts. In
                                    case of a withdrawable circuit-breaker, the Ekip AUP contacts give the signal of moving part racked-in/out
                                    from the fixed part.
                                    The assembly assures that the position signalling is given also with the moving part withdrawn.
                                           IMPORTANT: in case of multiple communication modules, only one can be connected
                                               to the Ekip AUP contacts.
                                    Further information on assembling Ekip AUP modules and contacts is available on the web site http://www.
                                    abb.com/abblibrary/DownloadCenter/, in particular in the kit sheet 1SDH001000r0811.


       8 - Ekip RTC



                                    The communication modules are always supplied with an Ekip RTC auxiliary contact, which gives to the trip
                                    unit the signal indicating that the circuit-breaker is ready to receive a close command.
                                    Further information on the assembly of the Ekip RTC contact is available on the web site http://www.abb.
                                    com/abblibrary/DownloadCenter/, in particular in the kit sheet 1SDH000999r0614.


























       234 | © 2020 ABB |  1SDH001330R1002 - ECN000134959 - Rev. A                        Other electronic accessories | 8 - Ekip RTC
   231   232   233   234   235   236   237   238   239   240   241