Page 125 - MCCB-XT2-XT4

ABB | SACE Tmax XT

3 - Ekip Supply

Ekip Supply is an accessory supply module. It is available in two models, depending on the incoming
voltage to be provided.
It performs three functions:
• supplies auxiliary power to Ekip Touch
• allows the modules installed inside Ekip Cartridge to be connected to Ekip Touch
• acts as a bridge for the Local Bus between Ekip Touch and the external electronic accessories (e.g.
Ekip Signalling 10K and Ekip Multimeter)
The module has a Power led to signal the presence of incoming power supply:
• off: no supply
• on (steady): supply present

Electrical characteristics Ekip Supply Ekip Supply
Model
24-48VDC 110-240 VAC/DC
Power supply voltages 21,5 ÷ 53 VDC 105 ÷ 265 VAC/DC
Frequency -- 45 ÷ 66Hz
Maximum power consumption without modules
(1) 3 W 3 VA/W
Maximum power consumption with modules (2) 10 W 10 VA/W
Maximum inrush current 2 A for 20 ms 2 A for 20 ms

(1) Ekip Touch with just Ekip Supply
(2) Ekip Touch with three modules connected

Connections The module must be assembled in the first slot of Ekip Cartridge.
For references about the connection and terminals, please consult document 1SdM000068r0001; use
AWG 22-16 cables with 1.4 mm maximum outer diameter for the external cabling.
To connect the module to Ekip Cartridge, please consult document 1SdH002009A1503.

123 | © 2022 ABB | 1SDH002031A1002 - ECN000212994 External electronic accessories | 3 - Ekip Supply